Standard bolt-together components are available in a broad range of sizes and weight capacities.  We also offer the accessories necessary to customise your system to meet your specific load, space and operation requirements.

The low cost solution for simple material handling requirements. These conveyors are widely used because of their simplicity, low unit cost and ease of maintenance.

As the cornerstone of unit load conveying systems, this conveyor provides positive drive for single or bi-directional transportation of small, medium or large loads.  It is also capable of low pressure accumulation with the use of plastic slip sleeves on the rollers.

This conveyor consists of separate zones of chain driven live roller conveyor, each powered through a mechanical clutch.  The clutch controlled zone allows loads to advance to the farthest downstream empty zone.  Each zone is signalled and disengaged in succession, providing accumulation with zero line pressure.  The loads never contact!  This method of accumulation is more cost effective than individually powered and controlled sections of chain driven live roller conveyor.

Loads on this conveyor are transported on two or more strands of double pitch roller chain.  It is ideal for handling loads that cannot be conveyed on roller conveyor such as containers with feet, wire baskets, pallets with bottom boards running perpendicular to the direction of flow, and pallets with poor integrity.

Chain Transfers are short runs of two or more strands of double pitch chain conveyor built into a Chain Driven Live Roller Conveyor.  The transfer chains rest below the rollers. When activated by an air operated lifting device, they pop-up beneath the load and provide right angle transfers off the conveyor.